MicrogridBusDQ

Source: GridKit/Model/PowerElectronics/MicrogridBusDQ/README.md

The bus model used for the microgrid found in Pogaku et al.[1] and Bidram et al.[2]

Parameters:

• \(RN\) - Virtual Resistance

Variables (External):

• \(v_{D}\) - Bus voltage along direct axis

• \(v_{Q}\) - Bus voltage along quadrature axis

Equations (External, Residuals):

• \(\frac{-v_D}{RN}\)

• \(\frac{-v_Q}{RN}\)

There are no internal variables to this system. Only residuals to be added from existing externals. As \(RN \rightarrow \infty\) then the bus represent Kirchhoff’s current law.

---

[1]

Pogaku, Nagaraju, Milan Prodanovic, and Timothy C. Green. “Modeling, analysis and testing of autonomous operation of an inverter-based microgrid.” IEEE Transactions on power electronics 22.2 (2007): 613-625.

[2]

Bidram, Ali, Frank L. Lewis, and Ali Davoudi. “Distributed control systems for small-scale power networks: Using multiagent cooperative control theory.” IEEE Control systems magazine 34.6 (2014): 56-77.